Skip to main content

Why It's Important to Have Your Locks Replaced Quickly and Efficiently

Changing locks is important for your business or home. It helps to keep out unwanted individuals who may want to rob you or cause damage to your property.

Individuals with keys are responsible for a percentage of break-ins, so it's always best to be safe and replace your lock. You can also rekey your lock, but that's not as effective.

Lock Replacement

The locks on your home's doors protect it and its contents from thieves, trespassers, and other unwanted intruders. But over time, they can become damaged or worn out to the point of not being able to properly lock. When this happens, it's important to have a reliable lock replacement services to come in and replace your old locks.

One of the most obvious warning signs that you need to get your locks replaced is if they've been damaged by break-ins or robberies. Burglars often use force to open locks, which can cause them to malfunction and even fail completely.

You may also need to get your locks replaced if they have been lost or stolen. This is especially important if the keys were kept in a compromised location such as a desk drawer or desk. It's also a good idea to have your locks replaced if a roommate moves out, as it can be easy for disgruntled former roommates to gain access to the property after a split.

lock replacement service

Door Knob Replacement

Door knobs are a common feature of most homes and can make a big difference in the overall look. Replacing a knob can be a do-it-yourself project, but you should always be sure that you have the correct latch hardware and that the door’s hinges can accommodate the new knob. If your locks are old or damaged, it may be a good idea to consult with a professional locksmith.

The most important tool for this task is a screwdriver with a Phillips head. Start by removing the screws that hold the knob in place on one side of the door. Some knobs have a detent access hole (like a slot) that you can press with a firm wire (a straightened out paper clip works great) to release a spring-activated pin that holds the interior mechanism in place. Remove the knob and faceplate. Next, replace the latch and strike plate. Be sure that the strike plate is properly positioned to match the existing marks on the hinge mortise in the door frame.

Lock Rekeying

Changing locks is time-consuming and costly, but rekeying services can help you make your home or office secure without having to replace the entire lock. Rekeying involves reworking the lock by swapping out some of the pins in the lock cylinder. This makes it impossible for those with old key copies to unlock the door. Rekeying is also cheaper and faster than replacing locks.

It is important to rekey your locks if you’ve had a break-in and want to ensure that the thief can’t get back into your property. It’s also a good idea to rekey your locks if you’ve recently fired an employee or if someone has stolen a set of keys from you.

In order for your locks to be rekeyed, they must all belong to the same brand and use the same keyway. The locksmith will remove the pins in your lock cylinder and replace them with new ones that only work with your new key.

Lock Repair

Sometimes the locks in our homes or businesses do not work as well as they should. When this happens, it is a good idea to get them repaired as quickly as possible to minimize the risk of someone being able to break in through that door.

Usually, this problem is caused by a buildup of dirt or debris in the lock mechanism. To fix this, you should apply some lubricant to the lock. This could be a graphite spray or silicone lubricant. You can also try wiggling the key gently while turning it to dislodge any dirt that may be in there.

You should never attempt to force a broken key out of a lock as this can damage the components inside and make it even harder to get the lock to work again. A professional will be able to help you repair your lock without damaging the components inside it. Then, they can ensure that your door is still secure by installing new locks if necessary with the help Certified locksmiths.

Comments

Popular posts from this blog

Electric Switches Installation

The bare end of each wire should be in a hook-like loop and the black or colored wires should be attached to screw terminals on the switch. A bare copper ground wire connects to the green terminal screw on the switch. Turn off power to the switch at the circuit breaker or fuse box and use a voltage tester to make sure that it is dead. Remove the switch cover plate and unscrew the two screws that hold the switch in the electrical box. Wiring The three wires attached to a single-pole switch are a black common wire leading back to the power source, a white neutral wire connecting to the box and a light fixture, and a bare copper or green ground wire. You can work with these wires while the power is off. Before disconnecting any wires, take a picture of the way the switches are connected and the light fixture to help you reconnect them. Make sure the breaker is turned off before working on any electrical projects. Connect the common wires to the same terminals on both new switche

Door Closers Installation and Service

Door closers dampen the speed and force of a door to prevent it from slamming. They can be surface mounted or concealed in the frame, floor, or door. When doors slam, it can cause injuries to people or property damage. Door closers can help prevent this, and they can boost energy efficiency, too! Installation Door closers are a staple in many commercial buildings. They allow a door to close and latch properly, and prevent fire damage. They’re also an important part of climate control, especially in Boston’s frigid winters and humid summers, as they help keep warm or cold air inside. But they’re only effective if they do their job, and a broken or malfunctioning door closer can cause safety risks for your staff and visitors. That’s why you need a trusted company like Marshall’s Locksmith for reliable automatic door closer installation and repair services. While it may sound easy to fix a door closer, there are many different types, and each one has its installation process. The

Unlocking Peace of Mind: 24-Hour Locksmith Services

There is nothing more stressful than being locked out of your apartment, car, or office late at night. You need a 24-hour locksmith service that can come to your rescue! Some dishonest locksmiths will lure you in by presenting a low rate, such as $25, then add on extra charges as they work. For example, if you are getting your locks re-keyed they might charge for replacing existing pins. Emergency Services Whether you have locked your keys in the car, locked yourself out of your house in the middle of the night, or are concerned about a break-in at your office, there is always someone to call when you need an emergency locksmith. These professionals are trained to handle a wide variety of lock and security-related emergencies, such as helping you get back into your car or home when you’re locked out, repairing broken locks, or installing new ones. Lockout services   can happen to anyone at any time, especially when you’re trying to rush out the door to get to work or drop off t